? coilcraft, inc. 2006 specifications subject to change without notice. please check our website for latest information. smt power inductors - lpo2506 series document 208-1 document 208-1 revised 05/23/05 with an above-board height of just 1,19 mm, this is our thinnest power inductor series, perfect for pc card or other low profile applications. the lpo2506 comes in two styles. one is a standard on-board design that is 1,65 mm high. the second uses coilcraft?s inboard ? technol- ogy. by dropping the inductor core through a hole in the circuit board, the above-board height is reduced to 1,19 mm. (custom designs can reduce this even further to a maximum of 0,9 mm, depending on board thickness.) coilraft designer?s kit c332 contains samples of all in- board values shown; kit c333 contains all on-board values. to order, contact coilcraft, or purchase them on- line at http://order.coilcraft.com . in-board style on-board style l 20% 2 dcr max srf typ i sat 3 i rms 4 part number 1 part number 1 (h) (ohms) (mhz) (a) (a) lpo2506i-472l_ lpo2506o-472l_ 4.7 0.145 90 1.6 1.9 lpo2506i-682l_ lpo2506o-682l_ 6.8 0.165 75 1.3 1.7 lpo2506i-822l_ lpo2506o-822l_ 8.2 0.200 65 1.0 1.5 lpo2506i-103l_ lpo2506o-103l_ 10 0.240 60 1.0 1.5 lpo2506i-153l_ lpo2506o-153l_ 15 0.300 45 0.90 1.3 lpo2506i-223l_ lpo2506o-223l_ 22 0.420 35 0.70 1.0 lpo2506i-333l_ lpo2506o-333l_ 33 0.550 30 0.60 0.90 LPO2506I-473L_ lpo2506o-473l_ 47 0.765 22 0.50 0.70 lpo2506i-683l_ lpo2506o-683l_ 68 1.10 20 0.40 0.60 lpo2506i-104l_ lpo2506o-104l_ 100 1.60 15 0.30 0.50 lpo2506i-154l_ lpo2506o-154l_ 150 2.50 12 0.25 0.40 lpo2506i-224l_ lpo2506o-224l_ 220 3.65 10 0.22 0.32 lpo2506i-334l_ lpo2506o-334l_ 330 4.65 8.0 0.18 0.28 lpo2506i-474l_ lpo2506o-474l_ 470 6.75 6.5 0.14 0.24 lpo2506i-684l_ lpo2506o-684l_ 680 9.15 5.5 0.12 0.20 lpo2506i-105l_ lpo2506o-105l_ 1000 14.20 4.5 0.10 0.16 1. when ordering, please specify packaging code: lpo2506i-105l d packaging: d =13 machine-ready reel. eia-481 embossed plastic tape (1000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter d instead. 2. tested at 100 khz, 0.1 vrms, 0 adc. 3. dc current at which the inductance drops 10% (typ) from its value without current. 4. average current for a 40c rise above 25c ambient. 5. operating temperature range -40c to +85c. 6. electrical specifications at 25c.
? coilcraft, inc. 2006 specifications subject to change without notice. please check our website for latest information. smt power inductors - lpo2506 series document 208-2 revised 05/19/06 document 208-2 typical l vs frequency typical l vs current on-board style in-board style terminations: silver-palladium-platinum-glass frit weight: 0.24 ? 0.26 g tape and reel: 1000/13 reel 16 mm tape width for packaging data see tape and reel specifications section. 0.360 9,14 0.360 9,14 0.285 7,24 0.285 7,24 0.284 7,24 0.284 7,24 0.048 1,21 0.048 1,21 0.380 9,65 0.380 9,65 0.310 7,87 0.205 5,21 0.190 4,83 0.030 0,76 0.310 7,87 0.230 5,84 0.230 5,84 ? ? 0.284 7,21 max max max max max max max max dash number 0.205 5,21 0.190 4,83 0.030 0,76 hole through board land pattern land pattern 0.254 6,45 0.061 1,55 max max 0.047 1,19 max mounting plane: through board 0.254 6,45 0.065 1,65 max max 103
|
